Gas & Plumbing

Maintenance365 carry out all the checks you need to make sure your gas installations and appliances are safe and conform to the necessary standards. Once completed you will be issued with Gas Safe Registered Certificate (formerly CORGI)

Gas Safe Register is the official gas registration body for the United Kingdom, Isle of Man and Guernsey, appointed by the relevant Health and Safety Authority for each area. By law all gas engineers must be on the Gas Safe Register. Gas Safe Register replaced CORGI as the gas registration body in Great Britain and Isle of Man on 1 April 2009 and Northern Ireland and Guernsey on 1 April 2010.

After a Gas Safe registered engineer has fitted or serviced your gas appliance, they will leave you with a report which explains what checks they did. This report may be issued as a gas safety record, sometimes referred to as a gas safety certificate depending on the job you have asked them to do.

The gas safety information tells you

  • That the gas appliance or gas fitting has been checked to see if it is working safely and meets the correct safety standard
  • Description and location of each appliance and/or flue checked
  • Name, registration number and signature of the engineer who carried out the check
  • Date on which the appliance and/or flue was checked
  • The address of the property at which the appliance and/or flue is installed
  • The name and address of the landlord (or his agent where appropriate)
  • Any defect identified and any action required or taken to fix it
  • Confirmation of the results of operational safety checks carried out on the appliances.

The Gas Engineer will then issue a ‘Gas Safe Registered Certificate’ detailing any observed damage, deterioration, defects, dangerous conditions and any non-compliances with the present-day safety standard that might give rise to danger.

If anything dangerous or potentially dangerous is found, the overall condition of the Gas installation or appliance will be declared to be ‘unsatisfactory’, meaning that remedial action is required without delay to remove the risks to those in the premises.